What is welder’s anthrax?

Photo courtesy of PK Safety.

Substitution and prevention
    If there are metal particles being released into the air, the team should do its best to remove the hazard from the space by increasing ventilation, substituting equipment, or altering the type of tasks being performed on the work site. Removing the hazard may not be an option when workers are welding and working with metal. Workers can wear personal protective equipment (PPE), such as welding helmets and welding respirator masks, that cover the nose and mouth to block the spread and inhalation of contaminants while welding and working with metal. Fumes produced by welding of iron or steel can often be blocked by wearing a N95 respirator. A N100 mask provides the highest-rated protection by NIOSH filter efficiency. Depending on the welding being done and your environment, a Power Air Purifying Respirator (PAPR) respirator or airline respirator may be more suitable.
    Individuals using this equipment must be fully trained on how to inspect and wear it properly. The equipment must be checked at the beginning of each shift. If the mask appears worn, cracked, or frayed in any area, it should be removed for rotation until it can be repaired or replaced. There should be a clean seal between the mask and the worker’s face, to block out these hazardous contaminants.
    No one should be near the hazard unless it's absolutely essential for their work. Access to any environment in which metal shavings or debris are being released into the air should be limited to reduce exposure. Employers may want to set up barriers or access controls to prevent unauthorized individuals from entering the space.
    The crew can also use engineering controls to increase the distance between the workers and the hazard. Airtight barriers and enclosures can help limit the spread of metal particles. They team and also use a vacuum and regularly clean the worksite to remove as much debris from the air and area as possible. Avoid using compressed air or fans near the worksite, as this will only spread the particles around the space.
    Welder’s anthrax is a serious health risk for anyone cutting or working with metals. Harmful debris can float through the air and cause devastating health effects that can potentially be fatal. Employers can use this information to keep their workers safe from disease.